John
Read more
Sloan Crown Flushometer Parts
Crown Flushometer Parts List
Need help identifying the part you need? Use our part breakdown list to find the right part, or call us at 1-800-518-5388
-
-
Sloan V-651-A High Back Pressure Vacuum Breaker Repair Kit
Model #: V-651-A Item #: 101288List Price: $6.15 $5.84 You Save 5%This Sloan V-651-A Vacuum Breaker Repair Kit can be used in all Sloan Flushometers. The vacuum breaker acts as a one way valve that allows water to flow down thru it, but won’t allow water to siphon back up. It also allows air to pass thru the vents in the side of the vacuum breaker tube to break the vacuum that is created at the end of the flush cycle.
Learn More -
-
Sloan B-73-A Triple-Seal Flushometer Handle Assembly
Model #: B-73-A Item #: 101279List Price: $32.70 $27.47 You Save 16% -
Sloan B-51-A Triple Seal Handle Repair Kit
Model #: B-51-A Item #: 101283List Price: $12.40 $10.66 You Save 14%The Sloan B-51-A-BX Handle Repair Kit fits all Sloan handle operated flushometers. This handle repair kit is located between the oscillating metal handle and the flushometer body. When the user presses the flush handle the metal rod in this assembly slides to the inner parts of the flushometer to initiate the flush cycle. The spring then returns the handle to the center position. This upgraded triple seal handle kit is less prone to leaking.
Learn More -
-
-
Sloan H-573-A Locking Stop Cap
Model #: H-573-A Item #: 101304List Price: $22.55 $18.94 You Save 16%The Sloan H-573-A Locking Stop Cap is designed for use with H-700-A (1” and 3/4”) and H-600-A (1”) Bak-Chek screwdriver control stops.
Learn More -
Sloan H-582 Control Stop Cap (For 3/4" H-600-A Only)
Model #: H-582 Item #: 101305List Price: $23.95 $20.12 You Save 16%For use with 3/4” H-600-A Bak Chek screwdriver control stop. This cap threads onto the bonnet and covers the screwdriver adjustment slot.
Learn More -
Sloan H-622 Bonnet
Model #: H-622 Item #: 101300List Price: $14.85 $12.77 You Save 14%For use with 1”“ and 3/4”“ H-700-A and 1”“ H-600-A Bak Chek screwdriver control stop.
Learn More -
Sloan H-553 Tailpiece O-Ring
Model #: H-553 Item #: 101294List Price: $1.80 $1.71 You Save 5%This Sloan H-553 Tailpiece O-ring fits into a groove on the flushometer tailpiece. The tailpiece with the o-ring then slides into the control stop, where the o-ring creates a watertight seal. It is recommended that you replace this o-ring each time you loosen the connection.
Learn More -
-
Sloan V-600-AA Flushometer Vacuum Breaker Tube 3/4" x 9"
Model #: V-600-AA Item #: 101289List Price: $41.70 $35.03 You Save 16% -
Sloan V-600-AA Vacuum Breaker 1-1/4" x 9"
Model #: V-600-AA Item #: 107443List Price: $41.70 $35.03 You Save 16% -
Sloan V-600-AA Flushometer Vacuum Breaker Tube 1-1/2" x 9"
Model #: V-600-AA Item #: 101290List Price: $41.70 $35.03 You Save 16% -
-
Sloan G-78 Molded Cup (for New Style Piston)
Model #: G-78 Item #: 110443List Price: $7.00 $6.65 You Save 5% -
-
-
-
-
-
Urinal to Wall Gasket
Item #: 101070$8.22The 76-3115 Urinal Foam Gasket is designed for urinal to wall connections. Its dimensions are 2-1/4” ID and 3-1/4” OD, 3/4” thick. The gasket sits on the urinal flange and is compressed when the urinal is installed and the bolts are tightened. Tip: the flat part of the gasket goes to the urinal flange in the wall and applying a little grease will help hold the gasket in place.
Learn More -
Wall Hung Toilet Foam Gasket
Item #: 101069$11.12The 76-1311 Toilet Foam Ring is designed for wall-mounted toilets. The foam ring can expand and contract, keeping a tight seal if the closet shifts. This gasket does not fit all toilets, please check your sizing.
Learn More
