Henry
Read more
Sloan Manual Flushometer Model Specific Parts
-
-
Sloan Royal Flushometer Diaphragm Drop-In Kits
Model #: RoyalStarting at: $37.99
Dual filtered fixed bypass diaphragm - The dual filtered fixed bypass puts two filters in front of the metering bypass of the diaphragm. These filters effectively keep debris from clogging the flushometer.
Permex Synthetic Rubber Diaphragm - Highly chloramine resistant, the Royal flushometer diaphragm stands up to the harshest water conditions and provides longer life compared to natural rubber diaphragms.
Includes – Dual-Filtered fixed bypass “drop-in” diaphragm assembly only.
Life Expectancy – 3-5 Years
Solves Common Issues – Slow leaks into the fixture, Flush cycle too long or too short.
Applications – Toilets and Urinals – The colors of the relief valve and the refill head, plus the shape of the flow-ring identify the flush volume
Learn More -
-
Sloan V-651-A High Back Pressure Vacuum Breaker Repair Kit
Model #: V-651-A Item #: 101288$5.84This Sloan V-651-A Vacuum Breaker Repair Kit can be used in all Sloan Flushometers. The vacuum breaker acts as a one way valve that allows water to flow down thru it, but won’t allow water to siphon back up. It also allows air to pass thru the vents in the side of the vacuum breaker tube to break the vacuum that is created at the end of the flush cycle.
Learn More -
-
Sloan B-51-A Triple Seal Handle Repair Kit
Model #: B-51-A Item #: 101283$10.66The Sloan B-51-A-BX Handle Repair Kit fits all Sloan handle operated flushometers. This handle repair kit is located between the oscillating metal handle and the flushometer body. When the user presses the flush handle the metal rod in this assembly slides to the inner parts of the flushometer to initiate the flush cycle. The spring then returns the handle to the center position. This upgraded triple seal handle kit is less prone to leaking.
Learn More -
Sloan V-551-A Vacuum Breaker Repair Kit
Model #: V-551-A Item #: 101338$3.19The Sloan V-551-A Vacuum Breaker Repair Kit can be used in all Sloan Flushometers. The vacuum breaker acts as a one way valve that allows water to flow down thru it, but won’t allow water to siphon back up. It also allows air to pass thru the vents in the side of the vacuum breaker tube to break the vacuum that is created at the end of the flush cycle.
Learn More -
-
Sloan Regal A-156-A Diaphragm
Model #: A-156-A Item #: 101325$8.94This Sloan A-156-A Diaphragm fits all Sloan Regal flushometers. Due to the repeated movement of the diaphragm required for every flush cycle, the diaphragm is one of the most commonly replaced components in a flushometer.
Learn More -
Sloan A-71 Inside Cover
Model #: A-71 Item #: 101278$11.27This Sloan A-71 Inside Cover fits all diaphragm style Sloan flushometers. This black plastic cover sits on top of the diaphragm and under the metal outside cover. This A-71 inside cover creates a water tight chamber which plays a crucial role in the proper operation of the flushometer. A crack in this cover can cause chatter, an extended flush, or non-stop flushing.
Learn More -
-
-
-
Sloan B-50-A Handle Repair Kit
Model #: B-50-A Item #: 101334$3.39The Sloan B-50-A Handle Repair Kit fits all Sloan handle operated flushometers. This handle repair kit is located between the oscillating metal handle and the flushometer body. When the user presses the flush handle the metal rod in this assembly slides to the inner parts of the flushometer to initiate the flush cycle. The spring then returns the handle to the center position.
Learn More -
-
Sloan H-1015-A Tail Flow Control Kit
Model #: H-1015-A Item #: 163917$32.51This Sloan H-1015-A Tail Flow Control Kit is installed within the tailpiece between the stop body and the main valve body on High-Efficiency Flushometers that are 0.25 GPF (Gallon Per Flush) or 0.125 GPF (Gallon Per Flush).
Learn More -
Sloan H-622 Bonnet
Model #: H-622 Item #: 101300$12.77For use with 1”“ and 3/4”“ H-700-A and 1”“ H-600-A Bak Chek screwdriver control stop.
Learn More -
-
Sloan H-553 Tailpiece O-Ring
Model #: H-553 Item #: 101294$1.71This Sloan H-553 Tailpiece O-ring fits into a groove on the flushometer tailpiece. The tailpiece with the o-ring then slides into the control stop, where the o-ring creates a watertight seal. It is recommended that you replace this o-ring each time you loosen the connection.
Learn More -
-
-
-
-
-
-
-
-
-
